All MIBs › ACC-FLASH › accBrPortX25addr2
accBrPortX25addr2
Module: ACC-FLASH
OID (symbolic): ACC-FLASH::accBrPortX25addr2
OID (numeric): 1.3.6.1.4.1.5.1.1.4.14.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
What is accBrPortX25addr2?
This OID stores a second X.25 network address as a backup or alternate address for a bridge port. Engineers configure this for redundancy so if the primary X.25 address fails, the bridge can still connect using the secondary address. A typical setup might have addr1=12345 and addr2=12346 for failover capability.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.14.1.3 snmpwalk -v2c -c public <target> ACC-FLASH::accBrPortX25addr2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.14.1.3.1 snmpget -v2c -c public <target> ACC-FLASH::accBrPortX25addr2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.4.14.1.3.1 i <value>
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-FLASH::accBrPortX25addr2 OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5.1.1.4 | accBridge | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.14 | accBrPortX25Table | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.14.1 | accBrPortX25Entry | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.14.1.3 | accBrPortX25addr2 | ACC-FLASH |