All MIBs › ACC-FLASH › accBrFilterMode
accBrFilterMode
Module: ACC-FLASH
OID (symbolic): ACC-FLASH::accBrFilterMode
OID (numeric): 1.3.6.1.4.1.5.1.1.4.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
When Filter Mode is on, entries in the Filtering table are used to determine the disposition of each frame. When Filter mode is off, no filtering is done.
What is accBrFilterMode?
This OID enables or disables the use of a filtering table to selectively allow or deny frames based on their MAC addresses. Network admins turn this on when they need to restrict which devices can communicate across the bridge (security or traffic control). With filtering on (value 1), only frames matching entries in the filter table are forwarded; with it off (0), all frames pass through.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.16 snmpwalk -v2c -c public <target> ACC-FLASH::accBrFilterMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.16.1 snmpget -v2c -c public <target> ACC-FLASH::accBrFilterMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.4.16.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.4 | accBridge | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.16 | accBrFilterMode | ACC-FLASH |