All MIBs › ACC-FLASH › accBrFilterEntSrcMacAddr
accBrFilterEntSrcMacAddr
Module: ACC-FLASH
OID (symbolic): ACC-FLASH::accBrFilterEntSrcMacAddr
OID (numeric): 1.3.6.1.4.1.5.1.1.4.18.1.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description:
Source MAC Address of the Filtering entry.
What is accBrFilterEntSrcMacAddr?
This OID stores a 6-byte source MAC address used in a bridge filtering rule to match traffic from specific devices. Network engineers use this to allow or deny traffic originating from particular hosts or MAC addresses on the network. For instance, storing '00:1a:2b:3c:4d:5e' lets you create a filter that only permits or blocks frames from that specific network interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.18.1.2 snmpwalk -v2c -c public <target> ACC-FLASH::accBrFilterEntSrcMacAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.18.1.2.1 snmpget -v2c -c public <target> ACC-FLASH::accBrFilterEntSrcMacAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.4.18.1.2.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.4 | accBridge | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.18 | accBrFilterTable | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.18.1 | accBrFilterEntry | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.18.1.2 | accBrFilterEntSrcMacAddr | ACC-FLASH |