All MIBs › ACC-FLASH › accBrFilterEntPort
accBrFilterEntPort
Module: ACC-FLASH
OID (symbolic): ACC-FLASH::accBrFilterEntPort
OID (numeric): 1.3.6.1.4.1.5.1.1.4.18.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
In all cases, the destination port of the received frame.
What is accBrFilterEntPort?
This OID specifies which physical port on the bridge should receive frames that match a filter rule. You would configure this when setting up traffic filtering to direct packets to a specific egress port based on their characteristics. For example, setting this to port 3 means all packets matching this filter rule will exit through bridge port 3.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.18.1.4 snmpwalk -v2c -c public <target> ACC-FLASH::accBrFilterEntPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.18.1.4.1 snmpget -v2c -c public <target> ACC-FLASH::accBrFilterEntPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.4.18.1.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.4 | accBridge | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.18 | accBrFilterTable | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.18.1 | accBrFilterEntry | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.18.1.4 | accBrFilterEntPort | ACC-FLASH |