All MIBs › ACC-FLASH › accBrFilterEntDisp
accBrFilterEntDisp
Module: ACC-FLASH
OID (symbolic): ACC-FLASH::accBrFilterEntDisp
OID (numeric): 1.3.6.1.4.1.5.1.1.4.18.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Disposition of received Frame. Note that a Frame is never sent back out on the Port on which it was received.
What is accBrFilterEntDisp?
This OID sets the disposition (typically 'forward' or 'discard') for frames that match a filter entry's source and destination MAC addresses. Engineers configure this to decide whether a matching frame should be passed through to other ports or dropped. Setting it to 'forward' (value 1) allows frames matching this entry to cross the bridge; 'discard' (0) blocks them.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.18.1.3 snmpwalk -v2c -c public <target> ACC-FLASH::accBrFilterEntDisp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.18.1.3.1 snmpget -v2c -c public <target> ACC-FLASH::accBrFilterEntDisp.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.4.18.1.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.4 | accBridge | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.18 | accBrFilterTable | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.18.1 | accBrFilterEntry | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.18.1.3 | accBrFilterEntDisp | ACC-FLASH |