All MIBs › ACC-FLASH › accBrFiltPatternPort
accBrFiltPatternPort
Module: ACC-FLASH
OID (symbolic): ACC-FLASH::accBrFiltPatternPort
OID (numeric): 1.3.6.1.4.1.5.1.1.4.22.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Bridge Pattern Filter table bridge port
What is accBrFiltPatternPort?
This OID specifies which physical port on the bridge a pattern filter rule applies to. You would configure this to limit a specific filter rule to monitor or filter traffic on only one port rather than all ports. Setting this to port 2 means the pattern filter will only examine and act upon frames entering or leaving port 2.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.22.1.2 snmpwalk -v2c -c public <target> ACC-FLASH::accBrFiltPatternPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.22.1.2.1 snmpget -v2c -c public <target> ACC-FLASH::accBrFiltPatternPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.4.22.1.2.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> accBrFiltPatternPort.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.4 | accBridge | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.22 | accBrFiltPatternTable | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.22.1 | accBrFiltPatternEntry | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.22.1.2 | accBrFiltPatternPort | ACC-FLASH |