All MIBs › ACC-FLASH › accBrFiltPatternCompVal
accBrFiltPatternCompVal
Module: ACC-FLASH
OID (symbolic): ACC-FLASH::accBrFiltPatternCompVal
OID (numeric): 1.3.6.1.4.1.5.1.1.4.22.1.6
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description:
Bridge Pattern Filter table user defined comparison value.
What is accBrFiltPatternCompVal?
ACC-FLASH::accBrFiltPatternCompVal contains a comparison value (as an octet string) that is matched against incoming packet data to determine if a filter rule should apply. This is typically configured alongside the pattern mask to identify specific types of traffic you want to treat differently. For instance, if you want to filter TCP traffic (protocol byte 0x06), you'd set this to the hex value of that protocol.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.22.1.6 snmpwalk -v2c -c public <target> ACC-FLASH::accBrFiltPatternCompVal
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.22.1.6.1 snmpget -v2c -c public <target> ACC-FLASH::accBrFiltPatternCompVal.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.4.22.1.6.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.4 | accBridge | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.22 | accBrFiltPatternTable | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.22.1 | accBrFiltPatternEntry | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.22.1.6 | accBrFiltPatternCompVal | ACC-FLASH |