All MIBs › ACC-FLASH › accBrFiltPatternByteOff
accBrFiltPatternByteOff
Module: ACC-FLASH
OID (symbolic): ACC-FLASH::accBrFiltPatternByteOff
OID (numeric): 1.3.6.1.4.1.5.1.1.4.22.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Bridge Pattern Filter table byte offset into the packet.
What is accBrFiltPatternByteOff?
This OID specifies the byte offset within a packet where pattern matching should begin, allowing deep-packet inspection beyond the standard headers. Network engineers use this to match patterns deep inside packet payloads when filtering based on application data. For example, a byte offset of 100 means the pattern filter will start examining data 100 bytes from the beginning of the frame.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.22.1.4 snmpwalk -v2c -c public <target> ACC-FLASH::accBrFiltPatternByteOff
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.22.1.4.1 snmpget -v2c -c public <target> ACC-FLASH::accBrFiltPatternByteOff.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.4.22.1.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.4 | accBridge | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.22 | accBrFiltPatternTable | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.22.1 | accBrFiltPatternEntry | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.22.1.4 | accBrFiltPatternByteOff | ACC-FLASH |