All MIBs › ACC-FLASH › accBrFiltIIEntProtocol
accBrFiltIIEntProtocol
Module: ACC-FLASH
OID (symbolic): ACC-FLASH::accBrFiltIIEntProtocol
OID (numeric): 1.3.6.1.4.1.5.1.1.4.19.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Protocol to be used in conjunction with logical operation to determine the disposition of all received packets.
What is accBrFiltIIEntProtocol?
This OID specifies the network protocol type that an advanced filter should match against. You configure this to filter traffic by protocol when you need granular control over how different protocol families are handled. A value of 6 typically represents TCP, so the filter would only evaluate TCP packets.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.19.1.6 snmpwalk -v2c -c public <target> ACC-FLASH::accBrFiltIIEntProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.19.1.6.1 snmpget -v2c -c public <target> ACC-FLASH::accBrFiltIIEntProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.4.19.1.6.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.4 | accBridge | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.19 | accBrFiltIITable | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.19.1 | accBrFiltIIEntry | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.19.1.6 | accBrFiltIIEntProtocol | ACC-FLASH |