All MIBs › ACC-FLASH › accBrFdbEntPort
accBrFdbEntPort
Module: ACC-FLASH
OID (symbolic): ACC-FLASH::accBrFdbEntPort
OID (numeric): 1.3.6.1.4.1.5.1.1.4.7.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Port to which frame is to be relayed for frame to be forwarded. Has no meaning for other dispositions.
What is accBrFdbEntPort?
This OID specifies which port number the frame should be relayed to for entries with a 'forward' disposition as an integer value you can read and write. Network engineers configure this to direct traffic with a specific MAC address destination to the correct physical port on the bridge. For example, setting this to 3 means all frames destined for this MAC address will be sent out port 3.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.7.1.3 snmpwalk -v2c -c public <target> ACC-FLASH::accBrFdbEntPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.7.1.3.1 snmpget -v2c -c public <target> ACC-FLASH::accBrFdbEntPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.4.7.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> accBrFdbEntPort.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.4 | accBridge | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.7 | accBrFdbTable | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.7.1 | accBrFdbEntry | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.7.1.3 | accBrFdbEntPort | ACC-FLASH |