All MIBs › ACC-DN › accDnX25InOutAddr
accDnX25InOutAddr
Module: ACC-DN
OID (symbolic): ACC-DN::accDnX25InOutAddr
OID (numeric): 1.3.6.1.4.1.5.1.1.19.21.1.17
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description:
X25 address for other end of circuit; we'll send to this address and will accept packets from this address for this circuit. Object required in entry-adding SET PDU if circuit type is X.25
What is accDnX25InOutAddr?
This OID stores the X.25 network address for the remote end of a circuit, telling the gateway where to send traffic and which addresses to accept packets from. For X.25 circuits, you must configure this address so the device knows which remote node to connect to. For example, an address value of "3100012345" would direct traffic to that specific X.25 subscriber number on the public network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.19.21.1.17 snmpwalk -v2c -c public <target> ACC-DN::accDnX25InOutAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.19.21.1.17.1 snmpget -v2c -c public <target> ACC-DN::accDnX25InOutAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.19.21.1.17.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.19 | accDn | ACC-DN |
| 1.3.6.1.4.1.5.1.1.19.21 | accDnCktTable | ACC-DN |
| 1.3.6.1.4.1.5.1.1.19.21.1 | accDnCktEntry | ACC-DN |
| 1.3.6.1.4.1.5.1.1.19.21.1.17 | accDnX25InOutAddr | ACC-DN |