All MIBs › ACC-DN › accDnX25InAddr
accDnX25InAddr
Module: ACC-DN
OID (symbolic): ACC-DN::accDnX25InAddr
OID (numeric): 1.3.6.1.4.1.5.1.1.19.21.1.18
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description:
Packets from this address are accepted on this circuit. Object will be set to default value if not present in entry-adding SET PDU.
What is accDnX25InAddr?
This OID specifies which X.25 addresses are allowed to send packets inbound on this circuit, acting as an input filter or allowlist. You can configure this separately from the outbound address if your circuit design requires asymmetric addressing. For example, setting this to "3100054321" means only packets from that remote address will be accepted on this circuit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.19.21.1.18 snmpwalk -v2c -c public <target> ACC-DN::accDnX25InAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.19.21.1.18.1 snmpget -v2c -c public <target> ACC-DN::accDnX25InAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.19.21.1.18.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> accDnX25InAddr.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.19 | accDn | ACC-DN |
| 1.3.6.1.4.1.5.1.1.19.21 | accDnCktTable | ACC-DN |
| 1.3.6.1.4.1.5.1.1.19.21.1 | accDnCktEntry | ACC-DN |
| 1.3.6.1.4.1.5.1.1.19.21.1.18 | accDnX25InAddr | ACC-DN |