All MIBs › ACC-BGP › accBgpAggrComponentProtocol
accBgpAggrComponentProtocol
Module: ACC-BGP
OID (symbolic): ACC-BGP::accBgpAggrComponentProtocol
OID (numeric): 1.3.6.1.4.1.5.1.1.51.7.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The route's protocol owner that will cause this aggregate component to activate.
What is accBgpAggrComponentProtocol?
This OID specifies which routing protocol (like OSPF, RIP, or static routes) must have an active route for this aggregate component to become available in BGP. You configure this to control which source protocols can trigger the announcement of an aggregated route. For example, setting it to OSPF means the aggregate only advertises when OSPF knows the route.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.51.7.1.5 snmpwalk -v2c -c public <target> ACC-BGP::accBgpAggrComponentProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.51.7.1.5.1 snmpget -v2c -c public <target> ACC-BGP::accBgpAggrComponentProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.51.7.1.5.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.51 | accBgp | ACC-BGP |
| 1.3.6.1.4.1.5.1.1.51.7 | accBgpAggrComponentTable | ACC-BGP |
| 1.3.6.1.4.1.5.1.1.51.7.1 | accBgpAggrComponentEntry | ACC-BGP |
| 1.3.6.1.4.1.5.1.1.51.7.1.5 | accBgpAggrComponentProtocol | ACC-BGP |