All MIBs › ACC-ASYNC › accAsyncBreaks
accAsyncBreaks
Module: ACC-ASYNC
OID (symbolic): ACC-ASYNC::accAsyncBreaks
OID (numeric): 1.3.6.1.4.1.5.1.1.68.2.1.6
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description:
What is accAsyncBreaks?
This OID counts the number of break sequences detected on the async serial line, which are intentional signal disruptions used for control or error recovery. Break signals are sometimes sent by terminals or modems as a way to reset communication or get attention from the device. A counter value of 2 breaks might indicate someone pressed Ctrl+C on a connected terminal, or a modem sending an emergency signal.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.68.2.1.6 snmpwalk -v2c -c public <target> ACC-ASYNC::accAsyncBreaks
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.68.2.1.6.1 snmpget -v2c -c public <target> ACC-ASYNC::accAsyncBreaks.1
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-ASYNC::accAsyncBreaks OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5.1.1.68 | accAsync | ACC-ASYNC |
| 1.3.6.1.4.1.5.1.1.68.2 | accAsyncStatTable | ACC-ASYNC |
| 1.3.6.1.4.1.5.1.1.68.2.1 | accAsyncStatEntry | ACC-ASYNC |
| 1.3.6.1.4.1.5.1.1.68.2.1.6 | accAsyncBreaks | ACC-ASYNC |