All MIBs › ACC-ACCESSPARTITION › accAccessPartitionIpPool
accAccessPartitionIpPool
Module: ACC-ACCESSPARTITION
OID (symbolic): ACC-ACCESSPARTITION::accAccessPartitionIpPool
OID (numeric): 1.3.6.1.4.1.5.1.1.63.1.1.29
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description:
The access partition name to which the ip address pool is assigned.
What is accAccessPartitionIpPool?
This OID specifies the name (up to 16 characters) of the IP address pool from which dynamic IP addresses are assigned to clients connecting on this access partition. You configure this to determine which range of IP addresses customers on this partition can receive for their connections. For example, setting this to 'pool_cust_a' means clients on this partition get addresses from that specific pool rather than a different pool.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.63.1.1.29 snmpwalk -v2c -c public <target> ACC-ACCESSPARTITION::accAccessPartitionIpPool
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.63.1.1.29.1 snmpget -v2c -c public <target> ACC-ACCESSPARTITION::accAccessPartitionIpPool.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.63.1.1.29.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.63 | accAccessPartition | ACC-ACCESSPARTITION |
| 1.3.6.1.4.1.5.1.1.63.1 | accAccessPartitionTable | ACC-ACCESSPARTITION |
| 1.3.6.1.4.1.5.1.1.63.1.1 | accAccessPartitionEntry | ACC-ACCESSPARTITION |
| 1.3.6.1.4.1.5.1.1.63.1.1.29 | accAccessPartitionIpPool | ACC-ACCESSPARTITION |