All MIBs › AC-BOARD-MIB › uniDirectionalRTP
uniDirectionalRTP
Module: AC-BOARD-MIB
OID (symbolic): AC-BOARD-MIB::uniDirectionalRTP
OID (numeric): 1.3.6.1.4.1.5003.9.10.1.3.6.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: uni Directional RTP. enables one sided RTP stream - according to niDirectionalRTPMode. enables the User to set the channel to work with unidirectional RTP streams. When UniDirectionalRTP is set to acRTPTxOnly, the receiver part of the channel will be disabled, and only the transmitter (encoder) will work. When UniDirectionalRTP is set to acRTPRxOnly, the transmitter part of the channel will be disabled, and only the receiver (decoder) will work. When UniDirectionalRTP is set to acRTPTxRx, both sides will be enabled. Users should note that when configuring a session between two endpoints, some of the channel configuration parameters must be identical on both sides. Such parameters are the voice coder type, the Fax/Modem transport type and bypass coders. All other configuration parameters are independent.
What is uniDirectionalRTP?
This OID sets the RTP stream direction: transmit-only, receive-only, or bidirectional, based on the enumerated mode value. Engineers use this for asymmetric applications or to disable unused receive/transmit paths for resource efficiency. A value indicating acRTPTxOnly disables the receiver and runs encoder only.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.1.3.6.1.1.3 snmpwalk -v2c -c public <target> AC-BOARD-MIB::uniDirectionalRTP
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.1.3.6.1.1.3.1 snmpget -v2c -c public <target> AC-BOARD-MIB::uniDirectionalRTP.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> uniDirectionalRTP.1
Start monitoring AudioCodes Mediant-series gateway boards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AC-BOARD-MIB::uniDirectionalRTP OID value, configure state conditions and alerts, and monitor any AudioCodes Mediant-series gateway boards from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5003 | audioCodes | AC-ATM-MIB |
| 1.3.6.1.4.1.5003.9 | acProducts | AC-ATM-MIB |
| 1.3.6.1.4.1.5003.9.10 | acBoardMibs | AC-ATM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5003.9.10.1 | acBoard | AC-BOARD-MIB |
| 1.3.6.1.4.1.5003.9.10.1.3 | channelConfiguration | AC-BOARD-MIB |
| 1.3.6.1.4.1.5003.9.10.1.3.6 | transportSettings | AC-BOARD-MIB |
| 1.3.6.1.4.1.5003.9.10.1.3.6.1 | transportSettingsTable | AC-BOARD-MIB |
| 1.3.6.1.4.1.5003.9.10.1.3.6.1.1 | transportSettingsEntry | AC-BOARD-MIB |
| 1.3.6.1.4.1.5003.9.10.1.3.6.1.1.3 | uniDirectionalRTP | AC-BOARD-MIB |