All MIBs › AC-ANALOG-MIB › acAnalogFxsMinFlashHookTime
acAnalogFxsMinFlashHookTime
Module: AC-ANALOG-MIB
OID (symbolic): AC-ANALOG-MIB::acAnalogFxsMinFlashHookTime
OID (numeric): 1.3.6.1.4.1.5003.9.10.8.1.3.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Sets the minimal time (in msec) for detection of a flash-hook event (for FXS only). The valid range is 25 to 300. The default value is 300 msec.
Detection is guaranteed for flash hook periods of at least 60 msec (when setting the minimal time to 25). Flash-hook signals that last a shorter period of time are ignored.
Note: It is recommended to reduce the detection time by 50 msec from the desired value (e.g. if you set the value as 200 msec, then enter 150 msec, i.e. 200 minus 50). . Access: Offline. AC INI-Param: MINFLASHHOOKTIME
What is acAnalogFxsMinFlashHookTime?
This duration in milliseconds (25-300 range) sets the minimum flash-hook pulse width that the gateway recognizes as a valid feature code. Engineers tune it to filter noise; recommended values are 50 msec below the desired detection—e.g., set 150 to catch 200-msec pulses. Default 300 suits standard phone equipment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.8.1.3.1.4 snmpwalk -v2c -c public <target> AC-ANALOG-MIB::acAnalogFxsMinFlashHookTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.8.1.3.1.4.1 snmpget -v2c -c public <target> AC-ANALOG-MIB::acAnalogFxsMinFlashHookTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5003.9.10.8.1.3.1.4.1 i <value>
Start monitoring AudioCodes Mediant-series gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AC-ANALOG-MIB::acAnalogFxsMinFlashHookTime OID value, configure state conditions and alerts, and monitor any AudioCodes Mediant-series gateways from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5003 | audioCodes | AC-ATM-MIB |
| 1.3.6.1.4.1.5003.9 | acProducts | AC-ATM-MIB |
| 1.3.6.1.4.1.5003.9.10 | acBoardMibs | AC-ATM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5003.9.10.8 | acAnalog | AC-ANALOG-MIB |
| 1.3.6.1.4.1.5003.9.10.8.1 | acAnalogConfiguration | AC-ANALOG-MIB |
| 1.3.6.1.4.1.5003.9.10.8.1.3 | acAnalogFxsConfig | AC-ANALOG-MIB |
| 1.3.6.1.4.1.5003.9.10.8.1.3.1 | acAnalogFxs | AC-ANALOG-MIB |
| 1.3.6.1.4.1.5003.9.10.8.1.3.1.4 | acAnalogFxsMinFlashHookTime | AC-ANALOG-MIB |