AC-ANALOG-MIB :: acAnalogFxoFarEndDisconnectType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAC-ANALOG-MIBacAnalogFxoFarEndDisconnectType

acAnalogFxoFarEndDisconnectType

Module: AC-ANALOG-MIB

OID (symbolic): AC-ANALOG-MIB::acAnalogFxoFarEndDisconnectType

OID (numeric): 1.3.6.1.4.1.5003.9.10.8.1.2.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This parameter sets the source for the acEV_FAR_END_DISCONNECTED event (or for the relevant control protocol event). It is a bit field parameter, hence (for example) if both CPT and current disconnect are required, the parameter should be set to 5. FarDisconnect contributor: 1 = CPT 2 = PolarityReversal 4 = CurrentDisconnect 8 = Silence. Access: Offline. AC INI-Param: FARENDDISCONNECTTYPE

What is acAnalogFxoFarEndDisconnectType?

This bitmask parameter (0-128) controls which detection methods trigger a far-end disconnect event: CPT tones, polarity reversal, current drop, or silence. Engineers set it to combine detection modes—for example, value 5 means both CPT and current disconnect—tuning sensitivity for their carrier's signaling protocol. Setting it to 1 detects only tone-based disconnect signals.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.8.1.2.1.1
snmpwalk -v2c -c public <target> AC-ANALOG-MIB::acAnalogFxoFarEndDisconnectType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.8.1.2.1.1.1
snmpget -v2c -c public <target> AC-ANALOG-MIB::acAnalogFxoFarEndDisconnectType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5003.9.10.8.1.2.1.1.1 i <value>

Start monitoring AudioCodes Mediant-series gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AC-ANALOG-MIB::acAnalogFxoFarEndDisconnectType OID value, configure state conditions and alerts, and monitor any AudioCodes Mediant-series gateways from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5003audioCodesAC-ATM-MIB
1.3.6.1.4.1.5003.9acProductsAC-ATM-MIB
1.3.6.1.4.1.5003.9.10acBoardMibsAC-ATM-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5003.9.10.8acAnalogAC-ANALOG-MIB
1.3.6.1.4.1.5003.9.10.8.1acAnalogConfigurationAC-ANALOG-MIB
1.3.6.1.4.1.5003.9.10.8.1.2acAnalogFxoConfigAC-ANALOG-MIB
1.3.6.1.4.1.5003.9.10.8.1.2.1acAnalogFxoAC-ANALOG-MIB
1.3.6.1.4.1.5003.9.10.8.1.2.1.1acAnalogFxoFarEndDisconnectTypeAC-ANALOG-MIB