All MIBs › A3Com-System-r8-MIB › a3sysStartUpAction
a3sysStartUpAction
Module: A3Com-System-r8-MIB
OID (symbolic): A3Com-System-r8-MIB::a3sysStartUpAction
OID (numeric): 1.3.6.1.4.1.43.2.13.10.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This parameter determines the boot source when the system is powered on or reset. If monitor (1) is chosen, the system enters monitor mode immediately. If userListOnce (2) is chosen, the system attempts to boot from primary and secondary sources defined by the User Boot List. (Specifics about the use of the secondary boot source are provided by a3sysBootSources.) This list may identify network boot sources or local floppy sources, or both. If userListForever (3) is chosen, the system will keep trying the sources listed in the User Boot List until one of them is successful. If local(4) is chosen, the system will boot from the local floppy. The name of the file used is identified by the value of a3sysUblFileName for the Primary Boot Source.
What is a3sysStartUpAction?
This selects boot behavior: monitor mode, user boot list, or local. It controls how the system starts. For example, set to 2 (userListOnce).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.13.10.3 snmpwalk -v2c -c public <target> A3Com-System-r8-MIB::a3sysStartUpAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.13.10.3.1 snmpget -v2c -c public <target> A3Com-System-r8-MIB::a3sysStartUpAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.13.10.3.1 i <value>
Start monitoring Legacy 3Com routers (r8 platform) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3Com-System-r8-MIB::a3sysStartUpAction OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers (r8 platform) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.13 | a3ComSys | A3Com-System-r8-MIB |
| 1.3.6.1.4.1.43.2.13.10 | a3ComBoot | A3Com-System-r8-MIB |
| 1.3.6.1.4.1.43.2.13.10.3 | a3sysStartUpAction | A3Com-System-r8-MIB |