A3Com-System-r8-MIB :: a3sysIioRecoverySelect

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3Com-System-r8-MIBa3sysIioRecoverySelect

a3sysIioRecoverySelect

Module: A3Com-System-r8-MIB

OID (symbolic): A3Com-System-r8-MIB::a3sysIioRecoverySelect

OID (numeric): 1.3.6.1.4.1.43.2.13.13.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies the IIO or CEC boards that will dump and reboot in the event this IIO or CEC board crashes. This object is relevant only if the value of a3sysIioRecoveryProcedure is selectiveDumpAndReboot (6).

The boards are specified by their slot. Each slot is represented by a single bit in the value of this object. If that bit is set (to 1), then that board will dump and reboot.

Slot 0 is used to identify the CEC board, and corresponds to the least significant bit in this object.

Slot 1 is used to identify the IIO board in that slot and corresponds to the next significant bit in this object. The identification of all other boards follows this convention.

What is a3sysIioRecoverySelect?

This is a bitmask selecting which boards participate in crash recovery. It configures which modules react to crashes. For example, "0x03" for slots 0,1.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.13.13.1.1.3
snmpwalk -v2c -c public <target> A3Com-System-r8-MIB::a3sysIioRecoverySelect

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.13.13.1.1.3.1
snmpget -v2c -c public <target> A3Com-System-r8-MIB::a3sysIioRecoverySelect.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.13.13.1.1.3.1 i <value>

Start monitoring Legacy 3Com routers (r8 platform) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3Com-System-r8-MIB::a3sysIioRecoverySelect OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers (r8 platform) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2brouterMIBA3COM-BRIDGE-R3-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.2.13a3ComSysA3Com-System-r8-MIB
1.3.6.1.4.1.43.2.13.13a3ComRecoveryA3Com-System-r8-MIB
1.3.6.1.4.1.43.2.13.13.1a3sysIioRecoveryTableA3Com-System-r8-MIB
1.3.6.1.4.1.43.2.13.13.1.1a3sysIioRecoveryEntryA3Com-System-r8-MIB
1.3.6.1.4.1.43.2.13.13.1.1.3a3sysIioRecoverySelectA3Com-System-r8-MIB