All MIBs › A3Com-System-r8-MIB › a3sysDriveStatus
a3sysDriveStatus
Module: A3Com-System-r8-MIB
OID (symbolic): A3Com-System-r8-MIB::a3sysDriveStatus
OID (numeric): 1.3.6.1.4.1.43.2.13.8.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object identifies which disk drives are supported by this system. noDrives(1) means no disk drives are supported. driveA means only drive A is supported. driveB means only drive B is supported, while driveAB(4) means both drives A and B are supported.
What is a3sysDriveStatus?
This shows which drives exist: none, A only, B only, or both. It indicates available storage media. For example, 4 means both drives A and B.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.13.8.10 snmpwalk -v2c -c public <target> A3Com-System-r8-MIB::a3sysDriveStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.13.8.10.1 snmpget -v2c -c public <target> A3Com-System-r8-MIB::a3sysDriveStatus.1
Start monitoring Legacy 3Com routers (r8 platform) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3Com-System-r8-MIB::a3sysDriveStatus OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers (r8 platform) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.13 | a3ComSys | A3Com-System-r8-MIB |
| 1.3.6.1.4.1.43.2.13.8 | a3ComSysMisc | A3Com-System-r8-MIB |
| 1.3.6.1.4.1.43.2.13.8.10 | a3sysDriveStatus | A3Com-System-r8-MIB |