All MIBs › A3COM0073IGMP-SNOOP › igmpSnoopQueryMaxResponseTime
igmpSnoopQueryMaxResponseTime
Module: A3COM0073IGMP-SNOOP
OID (symbolic): A3COM0073IGMP-SNOOP::igmpSnoopQueryMaxResponseTime
OID (numeric): 1.3.6.1.4.1.43.10.37.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The maximum query response time in seconds advertised in IGMP v2 queries on this VLAN if the switch is the querier. Smaller values allow a switch to prune groups faster. So it is the maximum response time inserted into the general periodic queries. This variable enables the tuning of the burstiness of the IGMP traffic. If it is increased the responses have a larger time span in which to be generated by the hosts. It is set stack-wide. The default is 10 seconds and the range is 10 to 100 seconds. There could be 2 settings apart from the default. Slow Response (50 secs) and Very Slow Response (100 secs).
What is igmpSnoopQueryMaxResponseTime?
This INTEGER (10–100 seconds) sets the maximum response time advertised in IGMP v2 queries, controlling how quickly hosts must answer before timing out. Engineers tune this to optimize multicast group pruning speed and IGMP traffic burstiness. Setting it to 10 seconds forces quick responses from hosts and enables fast group removal; setting it to 100 spreads responses over a longer window.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.37.1.5 snmpwalk -v2c -c public <target> A3COM0073IGMP-SNOOP::igmpSnoopQueryMaxResponseTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.37.1.5.1 snmpget -v2c -c public <target> A3COM0073IGMP-SNOOP::igmpSnoopQueryMaxResponseTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.10.37.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> igmpSnoopQueryMaxResponseTime.1
Start monitoring Legacy 3Com switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM0073IGMP-SNOOP::igmpSnoopQueryMaxResponseTime OID value, configure state conditions and alerts, and monitor any Legacy 3Com switches from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| 1.3.6.1.4.1.43.10.37 | igmpMIB | A3COM0004-GENERIC |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.10.37.1 | igmpSnoop | A3COM0073IGMP-SNOOP |
| 1.3.6.1.4.1.43.10.37.1.5 | igmpSnoopQueryMaxResponseTime | A3COM0073IGMP-SNOOP |