All MIBs › A3COM0019-RMON-REMOTE-POLL › remPollProtocol
remPollProtocol
Module: A3COM0019-RMON-REMOTE-POLL
OID (symbolic): A3COM0019-RMON-REMOTE-POLL::remPollProtocol
OID (numeric): 1.3.6.1.4.1.43.10.25.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This defines the protocol with which to monitor the device.
Writing an address to the remPollAddress field causes a default remPollProtocol value to be setup. The default value is derived from the format/content of the address. If the requested protocol is not supported or is not compatible with the remPollAddress, then an error is returned when an attempt is made to set the remPollStatus to valid.
If the requested protocol is not supported then a badValue error should be returned. If the requested protocol is not compatible with the remPollAddress then an error is returned when an attempt is made to set the remPollStatus to valid.
This object may not be modified if the associated remPollStatus object is equal to valid(1).
What is remPollProtocol?
This writable OID selects the protocol used for remote polling (SNMP, ICMP, ARP, etc.). Operations teams choose the protocol based on device type and network configuration. A value like 'icmp' selects ping-based reachability testing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.25.1.1.1.4 snmpwalk -v2c -c public <target> A3COM0019-RMON-REMOTE-POLL::remPollProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.25.1.1.1.4.1 snmpget -v2c -c public <target> A3COM0019-RMON-REMOTE-POLL::remPollProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.10.25.1.1.1.4.1 i <value>
Start monitoring Legacy 3Com network probes/switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM0019-RMON-REMOTE-POLL::remPollProtocol OID value, configure state conditions and alerts, and monitor any Legacy 3Com network probes/switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| 1.3.6.1.4.1.43.10.25 | rmonExtensions | A3COM0004-GENERIC |
| 1.3.6.1.4.1.43.10.25.1 | remotePoll | A3COM0027-RMON-EXTENSIONS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.10.25.1.1 | remPollTable | A3COM0019-RMON-REMOTE-POLL |
| 1.3.6.1.4.1.43.10.25.1.1.1 | remPollTableEntry | A3COM0019-RMON-REMOTE-POLL |
| 1.3.6.1.4.1.43.10.25.1.1.1.4 | remPollProtocol | A3COM0019-RMON-REMOTE-POLL |