All MIBs › A3COM0019-RMON-REMOTE-POLL › remPollFailureEventIndex
remPollFailureEventIndex
Module: A3COM0019-RMON-REMOTE-POLL
OID (symbolic): A3COM0019-RMON-REMOTE-POLL::remPollFailureEventIndex
OID (numeric): 1.3.6.1.4.1.43.10.25.1.1.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The index of the eventEntry that is used when an unsuccessful poll is made after a number of successful polls.
The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index.
This object may not be modified if the associated remPollStatus object is equal to valid(1).
What is remPollFailureEventIndex?
This index identifies an event to raise when a poll fails after prior successes, signaling potential network or device problems. Operators use it to trigger alarms and escalations on outages. Setting it to 3 means 'fire event #3 if the remote system stops responding.'
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.25.1.1.1.13 snmpwalk -v2c -c public <target> A3COM0019-RMON-REMOTE-POLL::remPollFailureEventIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.25.1.1.1.13.1 snmpget -v2c -c public <target> A3COM0019-RMON-REMOTE-POLL::remPollFailureEventIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.10.25.1.1.1.13.1 i <value>
Start monitoring Legacy 3Com network probes/switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM0019-RMON-REMOTE-POLL::remPollFailureEventIndex OID value, configure state conditions and alerts, and monitor any Legacy 3Com network probes/switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| 1.3.6.1.4.1.43.10.25 | rmonExtensions | A3COM0004-GENERIC |
| 1.3.6.1.4.1.43.10.25.1 | remotePoll | A3COM0027-RMON-EXTENSIONS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.10.25.1.1 | remPollTable | A3COM0019-RMON-REMOTE-POLL |
| 1.3.6.1.4.1.43.10.25.1.1.1 | remPollTableEntry | A3COM0019-RMON-REMOTE-POLL |
| 1.3.6.1.4.1.43.10.25.1.1.1.13 | remPollFailureEventIndex | A3COM0019-RMON-REMOTE-POLL |