All MIBs › A3COM0012-TRAPTABLE2 › snmpTrapThrottle
snmpTrapThrottle
Module: A3COM0012-TRAPTABLE2
OID (symbolic): A3COM0012-TRAPTABLE2::snmpTrapThrottle
OID (numeric): 1.3.6.1.4.1.43.10.10.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The maximum rate at which that snmpTrapDestination is willing to receive traps, specified as the minimum interval in milliseconds between traps. For example, a value of 2000 will limit traps sent to this destination to one trap every 2 seconds. A value of zero indicates that no trap throttling is required.
What is snmpTrapThrottle?
The minimum interval in milliseconds between successive traps to this destination, limiting trap flood rates. A network engineer sets this to prevent overwhelming a monitoring system with bursts of redundant alerts. Example: a throttle of 5000 sends at most one trap per five seconds to that destination.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.10.2.1.6 snmpwalk -v2c -c public <target> A3COM0012-TRAPTABLE2::snmpTrapThrottle
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.10.2.1.6.1 snmpget -v2c -c public <target> A3COM0012-TRAPTABLE2::snmpTrapThrottle.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.10.10.2.1.6.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| 1.3.6.1.4.1.43.10.10 | localSnmp | A3COM0004-GENERIC |
| 1.3.6.1.4.1.43.10.10.2 | snmpTrapTable | A3COM0012-TRAPTABLE2 |
| 1.3.6.1.4.1.43.10.10.2.1 | snmpTrapEntry | A3COM0012-TRAPTABLE2 |
| 1.3.6.1.4.1.43.10.10.2.1.6 | snmpTrapThrottle | A3COM0012-TRAPTABLE2 |