A3COM-SWITCHING-SYSTEMS-MIB :: a3ComSysSnmpInternalAgentTrapDestinationMask

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-SWITCHING-SYSTEMS-MIBa3ComSysSnmpInternalAgentTrapDestinationMask

a3ComSysSnmpInternalAgentTrapDestinationMask

Module: A3COM-SWITCHING-SYSTEMS-MIB

OID (symbolic): A3COM-SWITCHING-SYSTEMS-MIB::a3ComSysSnmpInternalAgentTrapDestinationMask

OID (numeric): 1.3.6.1.4.1.43.29.4.5.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: A value which indicates to which other agents in the system traps should be sent. The value is a sum. It initially takes on the value 0, then for each agent which is to receive traps, 2 raised to the value of (a3ComSysSnmpAgentId - 1) for that agent is added to the sum. Note that only traps which are enabled according to the value of the a3ComSysSnmpInternalAgentTrapMask object will be forwarded, and that each trap which is forwarded will be transmitted to each agent identified by this mask.

What is a3ComSysSnmpInternalAgentTrapDestinationMask?

This integer specifies which internal agents should receive forwarded traps, using bit-field encoding of agent IDs. Engineers use this to control trap distribution between line cards and management modules. A value of 6 (binary 110) sends traps to agents 2 and 3 only.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.29.4.5.3
snmpwalk -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-MIB::a3ComSysSnmpInternalAgentTrapDestinationMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.29.4.5.3.1
snmpget -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-MIB::a3ComSysSnmpInternalAgentTrapDestinationMask.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.29.4.5.3.1 i <value>

Start monitoring 3Com SuperStack switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SWITCHING-SYSTEMS-MIB::a3ComSysSnmpInternalAgentTrapDestinationMask OID value, configure state conditions and alerts, and monitor any 3Com SuperStack switches (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.29switchingSystemsMibsA3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
1.3.6.1.4.1.43.29.4a3ComSwitchingSystemsMibA3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.29.4.5a3ComSysSnmpA3COM-SWITCHING-SYSTEMS-MIB
1.3.6.1.4.1.43.29.4.5.3a3ComSysSnmpInternalAgentTrapDestinationMaskA3COM-SWITCHING-SYSTEMS-MIB