A3COM-SWITCHING-SYSTEMS-MIB :: a3ComSysBridgePortAddressAction

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-SWITCHING-SYSTEMS-MIBa3ComSysBridgePortAddressAction

a3ComSysBridgePortAddressAction

Module: A3COM-SWITCHING-SYSTEMS-MIB

OID (symbolic): A3COM-SWITCHING-SYSTEMS-MIB::a3ComSysBridgePortAddressAction

OID (numeric): 1.3.6.1.4.1.43.29.4.10.3.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object, when read, always returns the value other(1). The behavior of setting this object to each of the acceptable values is as follows:

freezeAddress: causes all the learned dynamic addresses to be converted into static addresses.

flushAddress: causes all the addresses to be flushed from the address list for the bridge port identified by this entry.

flushDynamicAddress: causes all dynamic addresses to be flushed from the address list for the bridge port identified by this entry.

What is a3ComSysBridgePortAddressAction?

A write-only control to freeze, flush, or flush-dynamic learned MAC addresses on this port (read always returns 'other'). Engineers use this to manage address table state during troubleshooting or configuration changes. Writing 'freezeAddress' locks all learned addresses as static.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.29.4.10.3.1.5
snmpwalk -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-MIB::a3ComSysBridgePortAddressAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.29.4.10.3.1.5.1
snmpget -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-MIB::a3ComSysBridgePortAddressAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.29.4.10.3.1.5.1 i <value>

Start monitoring 3Com SuperStack switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SWITCHING-SYSTEMS-MIB::a3ComSysBridgePortAddressAction OID value, configure state conditions and alerts, and monitor any 3Com SuperStack switches (legacy) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.29switchingSystemsMibsA3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
1.3.6.1.4.1.43.29.4a3ComSwitchingSystemsMibA3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
1.3.6.1.4.1.43.29.4.10a3ComSysBridgeA3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
1.3.6.1.4.1.43.29.4.10.3a3ComSysBridgePortTableA3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
1.3.6.1.4.1.43.29.4.10.3.1a3ComSysBridgePortEntryA3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.29.4.10.3.1.5a3ComSysBridgePortAddressActionA3COM-SWITCHING-SYSTEMS-MIB