A3COM-SWITCHING-SYSTEMS-MIB :: a3ComSysAgentTrapDestinationTrapMask

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-SWITCHING-SYSTEMS-MIBa3ComSysAgentTrapDestinationTrapMask

a3ComSysAgentTrapDestinationTrapMask

Module: A3COM-SWITCHING-SYSTEMS-MIB

OID (symbolic): A3COM-SWITCHING-SYSTEMS-MIB::a3ComSysAgentTrapDestinationTrapMask

OID (numeric): 1.3.6.1.4.1.43.29.4.6.6.1.3

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: This value is a bit string that indicates which traps are enabled for the address identified by this entry. The octet string value is treated as a 64-bit value. The value is a sum. It initially takes on the value 0, then for each trap which is enabled, 2 raised to the value of (a3ComSysAgentTrapDescriptionIndex - 1) for that trap is added to the sum. A new entry in the table is created by setting the value of this object for a new destination address type and destination address. Note that an octet string of all zeros is not a valid value for this object.

What is a3ComSysAgentTrapDestinationTrapMask?

This read-write OCTET STRING (8 bytes) is a 64-bit bitmask enabling/disabling specific trap types for each destination. Each bit represents one trap; setting bit N enables trap (N+1). Managers use this to filter which of 64 possible trap types reach each receiver.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.29.4.6.6.1.3
snmpwalk -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-MIB::a3ComSysAgentTrapDestinationTrapMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.29.4.6.6.1.3.1
snmpget -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-MIB::a3ComSysAgentTrapDestinationTrapMask.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.29.4.6.6.1.3.1 s <value>

Start monitoring 3Com SuperStack switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SWITCHING-SYSTEMS-MIB::a3ComSysAgentTrapDestinationTrapMask OID value, configure state conditions and alerts, and monitor any 3Com SuperStack switches (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.29switchingSystemsMibsA3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
1.3.6.1.4.1.43.29.4a3ComSwitchingSystemsMibA3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.29.4.6a3ComSysAgentA3COM-SWITCHING-SYSTEMS-MIB
1.3.6.1.4.1.43.29.4.6.6a3ComSysAgentTrapDestinationTableA3COM-SWITCHING-SYSTEMS-MIB
1.3.6.1.4.1.43.29.4.6.6.1a3ComSysAgentTrapDestinationTableEntryA3COM-SWITCHING-SYSTEMS-MIB
1.3.6.1.4.1.43.29.4.6.6.1.3a3ComSysAgentTrapDestinationTrapMaskA3COM-SWITCHING-SYSTEMS-MIB