All MIBs › A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB › a3ComSysBridgePortAddressAction
a3ComSysBridgePortAddressAction
Module: A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
OID (symbolic): A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB::a3ComSysBridgePortAddressAction
OID (numeric): 1.3.6.1.4.1.43.29.4.10.3.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object, when read, always returns the value other(1). The behavior of setting this object to each of the acceptable values is as follows:
freezeAddress: causes all the learned dynamic addresses to be converted into static addresses.
flushAddress: causes all the addresses to be flushed from the address list for the bridge port identified by this entry.
flushDynamicAddress: causes all dynamic addresses to be flushed from the address list for the bridge port identified by this entry.
What is a3ComSysBridgePortAddressAction?
This read-write object controls MAC address learning behavior on the port. Engineers use it to freeze learned addresses into static entries or flush the address table for troubleshooting loop detection. For example, writing flushAddress clears all MAC entries learned on that port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.29.4.10.3.1.5 snmpwalk -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB::a3ComSysBridgePortAddressAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.29.4.10.3.1.5.1 snmpget -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB::a3ComSysBridgePortAddressAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.29.4.10.3.1.5.1 i <value>
Start monitoring 3Com SuperStack switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB::a3ComSysBridgePortAddressAction OID value, configure state conditions and alerts, and monitor any 3Com SuperStack switches (legacy) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.29 | switchingSystemsMibs | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| 1.3.6.1.4.1.43.29.4 | a3ComSwitchingSystemsMib | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| 1.3.6.1.4.1.43.29.4.10 | a3ComSysBridge | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| 1.3.6.1.4.1.43.29.4.10.3 | a3ComSysBridgePortTable | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| 1.3.6.1.4.1.43.29.4.10.3.1 | a3ComSysBridgePortEntry | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| 1.3.6.1.4.1.43.29.4.10.3.1.5 | a3ComSysBridgePortAddressAction | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |