A3COM-PORTPATH-R6-MIB :: a3ComPortCosInterleave

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-PORTPATH-R6-MIBa3ComPortCosInterleave

a3ComPortCosInterleave

Module: A3COM-PORTPATH-R6-MIB

OID (symbolic): A3COM-PORTPATH-R6-MIB::a3ComPortCosInterleave

OID (numeric): 1.3.6.1.4.1.43.2.17.2.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: (For bridging.) The number of high-priority packets that will be transmitted for each low-priority packet. If the value is 0, then low-priority packets will only be transmitted when there are no packets in the high-priority queue.

This object only applies to serial ports. Interleaving will not take affect on non-serial ports and this object will have the value 0 for those ports.

Note, this object has been deprecated from software versions 7.0 and later.

What is a3ComPortCosInterleave?

This integer (0+) specifies the ratio of high-priority packets sent per low-priority packet for serial ports. Engineers tune it to prevent low-priority traffic starvation while ensuring timely delivery of critical frames. A value of 3 means 3 high-priority packets transmit before each low-priority one.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.17.2.1.5
snmpwalk -v2c -c public <target> A3COM-PORTPATH-R6-MIB::a3ComPortCosInterleave

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.17.2.1.5.1
snmpget -v2c -c public <target> A3COM-PORTPATH-R6-MIB::a3ComPortCosInterleave.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.17.2.1.5.1 i <value>

Start monitoring Legacy 3Com routers/switches (R6, T1/WAN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-PORTPATH-R6-MIB::a3ComPortCosInterleave OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers/switches (R6, T1/WAN) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2brouterMIBA3COM-BRIDGE-R3-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.2.17a3ComPortA3COM-PORTPATH-R6-MIB
1.3.6.1.4.1.43.2.17.2a3ComPortTableA3COM-PORTPATH-R6-MIB
1.3.6.1.4.1.43.2.17.2.1a3ComPortEntryA3COM-PORTPATH-R6-MIB
1.3.6.1.4.1.43.2.17.2.1.5a3ComPortCosInterleaveA3COM-PORTPATH-R6-MIB