All MIBs › A3COM-PORTPATH-R6-MIB › a3ComPortBoundaryEncap
a3ComPortBoundaryEncap
Module: A3COM-PORTPATH-R6-MIB
OID (symbolic): A3COM-PORTPATH-R6-MIB::a3ComPortBoundaryEncap
OID (numeric): 1.3.6.1.4.1.43.2.17.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object decides the packet encapsulation rules to be applied to outgoing packets. If this is set to none (5), the boundary router on the other end of the serial link is capable of supporting translation. In this case, all bridged packets will be sent unchanged. Boundary routed packets will be sent with the default mode: Ethernet. All other settings of this object implies that the remote device does not support translation. Therefore, all packets must be encapsulated according to this object. In order for any modifications to take effect, the port associated with this command must be disabled and then enabled.
Note, this only applies to serial ports on a NB2. For all non-serial ports, this object will have the value notApplicable(1).
What is a3ComPortBoundaryEncap?
This enum sets packet encapsulation rules for boundary-routed traffic, controlling how bridged and routed packets are formatted. Engineers choose none(5) if the remote device supports translation, or specify a format if it doesn't. Setting none means packets traverse unchanged; other values force specific encapsulation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.17.2.1.4 snmpwalk -v2c -c public <target> A3COM-PORTPATH-R6-MIB::a3ComPortBoundaryEncap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.17.2.1.4.1 snmpget -v2c -c public <target> A3COM-PORTPATH-R6-MIB::a3ComPortBoundaryEncap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.17.2.1.4.1 i <value>
Start monitoring Legacy 3Com routers/switches (R6, T1/WAN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-PORTPATH-R6-MIB::a3ComPortBoundaryEncap OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers/switches (R6, T1/WAN) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.17 | a3ComPort | A3COM-PORTPATH-R6-MIB |
| 1.3.6.1.4.1.43.2.17.2 | a3ComPortTable | A3COM-PORTPATH-R6-MIB |
| 1.3.6.1.4.1.43.2.17.2.1 | a3ComPortEntry | A3COM-PORTPATH-R6-MIB |
| 1.3.6.1.4.1.43.2.17.2.1.4 | a3ComPortBoundaryEncap | A3COM-PORTPATH-R6-MIB |