A3COM-PORTPATH-R6-MIB :: a3ComPathDialRateAdaption

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-PORTPATH-R6-MIBa3ComPathDialRateAdaption

a3ComPathDialRateAdaption

Module: A3COM-PORTPATH-R6-MIB

OID (symbolic): A3COM-PORTPATH-R6-MIB::a3ComPathDialRateAdaption

OID (numeric): 1.3.6.1.4.1.43.2.18.2.1.13

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies the data rate to be used on the ISDN B channel. Rate64 and Rate56 specify that the channel be connected at 64K or 56K, respectively. The connection attempt would fail if the ISDN network does not support this. If Auto is specified, an outgoing call is first attempted at 64K and, if that should fail, the call is retried at 56K. On an incoming call, the call is automatically adapted to the correct rate. The path has to be enabled for the new setting to take effect.

What is a3ComPathDialRateAdaption?

Specifies the data rate for ISDN B-channel connections: 64K, 56K, or automatic. Engineers set this based on network and modem capabilities to ensure compatible connection speeds. Auto mode tries 64K first, then 56K on failure, matching incoming calls to the appropriate rate automatically.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.18.2.1.13
snmpwalk -v2c -c public <target> A3COM-PORTPATH-R6-MIB::a3ComPathDialRateAdaption

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.18.2.1.13.1
snmpget -v2c -c public <target> A3COM-PORTPATH-R6-MIB::a3ComPathDialRateAdaption.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.18.2.1.13.1 i <value>

Start monitoring Legacy 3Com routers/switches (R6, T1/WAN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-PORTPATH-R6-MIB::a3ComPathDialRateAdaption OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers/switches (R6, T1/WAN) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2brouterMIBA3COM-BRIDGE-R3-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.2.18a3ComPathDialA3COM-PORTPATH-R6-MIB
1.3.6.1.4.1.43.2.18.2a3ComPathDialTableA3COM-PORTPATH-R6-MIB
1.3.6.1.4.1.43.2.18.2.1a3ComPathDialEntryA3COM-PORTPATH-R6-MIB
1.3.6.1.4.1.43.2.18.2.1.13a3ComPathDialRateAdaptionA3COM-PORTPATH-R6-MIB