A3COM-PORTPATH-R6-MIB :: a3ComPathDialExDevType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-PORTPATH-R6-MIBa3ComPathDialExDevType

a3ComPathDialExDevType

Module: A3COM-PORTPATH-R6-MIB

OID (symbolic): A3COM-PORTPATH-R6-MIB::a3ComPathDialExDevType

OID (numeric): 1.3.6.1.4.1.43.2.18.2.1.15

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object describes the external device type that is connected to the serial-line type (eg, HSS, HDWAN) path. It is applicable only for a dialup path.

Use bri(1) setting if the path is connected to a digital modem or terminal adapter for ISDN connectivity.

Use modem(2) setting if the path is connected to an analog modem.

Use sw56(3) setting if the path is connected to a SWITCH56 CSU/DSU.

In order for any modifications to take effect, the path must be enabled(re-enabled if it is already enable).

What is a3ComPathDialExDevType?

Identifies the external device type: BRI (digital modem/terminal adapter), modem (analog), or SW56 (Switch56 CSU/DSU). This tells the system how to handle physical layer connectivity and protocols for dialup. Setting it to modem(2) configures appropriate handshake and modulation for analog modem links.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.18.2.1.15
snmpwalk -v2c -c public <target> A3COM-PORTPATH-R6-MIB::a3ComPathDialExDevType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.18.2.1.15.1
snmpget -v2c -c public <target> A3COM-PORTPATH-R6-MIB::a3ComPathDialExDevType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.18.2.1.15.1 i <value>

Start monitoring Legacy 3Com routers/switches (R6, T1/WAN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-PORTPATH-R6-MIB::a3ComPathDialExDevType OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers/switches (R6, T1/WAN) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2brouterMIBA3COM-BRIDGE-R3-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.2.18a3ComPathDialA3COM-PORTPATH-R6-MIB
1.3.6.1.4.1.43.2.18.2a3ComPathDialTableA3COM-PORTPATH-R6-MIB
1.3.6.1.4.1.43.2.18.2.1a3ComPathDialEntryA3COM-PORTPATH-R6-MIB
1.3.6.1.4.1.43.2.18.2.1.15a3ComPathDialExDevTypeA3COM-PORTPATH-R6-MIB