A3COM-MIP-R1-MIB :: a3ComMipControl

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › A3COM-MIP-R1-MIB › a3ComMipControl

a3ComMipControl

Module: A3COM-MIP-R1-MIB

OID (symbolic): A3COM-MIP-R1-MIB::a3ComMipControl

OID (numeric): 1.3.6.1.4.1.43.2.27.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: If this object is set to enabled(1), then multicast IP routing is in service. If it is set to disabled(2), then multicast IP routing is turned off.

What is a3ComMipControl?

Controls whether multicast IP routing is active (enabled=1) or disabled (disabled=2) on the device. Network engineers toggle this to enable or disable multicast forwarding capabilities. Setting to enabled(1) activates multicast routing; disabled(2) stops all multicast packet forwarding.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.27.1.1
snmpwalk -v2c -c public <target> A3COM-MIP-R1-MIB::a3ComMipControl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.27.1.1.1
snmpget -v2c -c public <target> A3COM-MIP-R1-MIB::a3ComMipControl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.27.1.1.1 i <value>

Start monitoring Legacy 3Com routers (multicast IP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-MIP-R1-MIB::a3ComMipControl OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers (multicast IP) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-AUDL-R1-MIB
1.3.6.1.4.1.43.2brouterMIBA3COM-AUDL-R1-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.2.27a3ComMIPA3COM-MIP-R1-MIB
1.3.6.1.4.1.43.2.27.1a3ComMipSConfigA3COM-MIP-R1-MIB
1.3.6.1.4.1.43.2.27.1.1a3ComMipControlA3COM-MIP-R1-MIB