A3COM-LIC-R1-MIB :: llcPortAdminDelayAckTimer

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-LIC-R1-MIBllcPortAdminDelayAckTimer

llcPortAdminDelayAckTimer

Module: A3COM-LIC-R1-MIB

OID (symbolic): A3COM-LIC-R1-MIB::llcPortAdminDelayAckTimer

OID (numeric): 1.3.6.1.4.1.43.2.26.1.1.1.14

Node type: OBJECT-TYPE

Type: TimeTicks

Access: read-write

Description: This object denotes the default value for the time interval during which the LLCs on this port shall delay acknowledgment of one or more I PDUs (up to the value of llcCcOperDelayAckCount). This function is not described in the IEEE 802.2 specification [5].

It is listed in the IBM Token-Ring Network Architecture Reference [6] as the T2 parameter and is widely implemented.

The expiration of this timer shall cause the local LLC to acknowledge all unacknowledged I PDUs. A value of 0 means that an acknowledgement will be sent immediately.

This object is associated with the llcPortAdminDelayAckCount object and is only defined if that object has a value greater than one.

What is llcPortAdminDelayAckTimer?

This TimeTicks interval bounds how long acknowledgment can be delayed even if the frame count hasn't been reached. This prevents indefinite acknowledgment delays if traffic becomes sparse. A 100-millisecond value guarantees the peer receives feedback within 100ms even during low-traffic periods.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.26.1.1.1.14
snmpwalk -v2c -c public <target> A3COM-LIC-R1-MIB::llcPortAdminDelayAckTimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.26.1.1.1.14.1
snmpget -v2c -c public <target> A3COM-LIC-R1-MIB::llcPortAdminDelayAckTimer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.26.1.1.1.14.1 i <value>

Start monitoring 3Com bridges/routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-LIC-R1-MIB::llcPortAdminDelayAckTimer OID value, configure state conditions and alerts, and monitor any 3Com bridges/routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2brouterMIBA3COM-BRIDGE-R3-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.2.26llcA3COM-LIC-R1-MIB
1.3.6.1.4.1.43.2.26.1llcPortGroupA3COM-LIC-R1-MIB
1.3.6.1.4.1.43.2.26.1.1llcPortAdminTableA3COM-LIC-R1-MIB
1.3.6.1.4.1.43.2.26.1.1.1llcPortAdminEntryA3COM-LIC-R1-MIB
1.3.6.1.4.1.43.2.26.1.1.1.14llcPortAdminDelayAckTimerA3COM-LIC-R1-MIB