A3COM-IPX-R5-MIB :: a3ipxX25configVCtimer

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-IPX-R5-MIBa3ipxX25configVCtimer

a3ipxX25configVCtimer

Module: A3COM-IPX-R5-MIB

OID (symbolic): A3COM-IPX-R5-MIB::a3ipxX25configVCtimer

OID (numeric): 1.3.6.1.4.1.43.2.7.7.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The maximum amount of time, in minutes, that can elapse when there is no activity on the X25 virtual circuit before it is cleared. This applies to the first virtual circuit established for a particular DTE address. IF more than one virtual circuit is established for the same DTE address, all are cleared (except for the first one established) when the first virtual circuit is not experiencing congestion.

NOTE: this object is no longer supported by NETBuilders running sw version 8.0 and greater. The corresponding functionality has been replaced by the X25 Profile feature. SNMP control over this feature will be added at a later date.

What is a3ipxX25configVCtimer?

This read-write INTEGER (1 to 512 minutes) sets the idle timeout before an X.25 virtual circuit is automatically cleared. Engineers use it to release stale circuits and free resources when no traffic crosses the link for an extended period. A value of 30 clears the circuit after 30 minutes of inactivity.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.7.7.1.5
snmpwalk -v2c -c public <target> A3COM-IPX-R5-MIB::a3ipxX25configVCtimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.7.7.1.5.1
snmpget -v2c -c public <target> A3COM-IPX-R5-MIB::a3ipxX25configVCtimer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.7.7.1.5.1 i <value>

Start monitoring Legacy 3Com routers (R5, IPX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-IPX-R5-MIB::a3ipxX25configVCtimer OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers (R5, IPX) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2brouterMIBA3COM-BRIDGE-R3-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.2.7a3ComIPXA3COM-IPX-R5-MIB
1.3.6.1.4.1.43.2.7.7a3ipxX25configTableA3COM-IPX-R5-MIB
1.3.6.1.4.1.43.2.7.7.1a3ipxX25configEntryA3COM-IPX-R5-MIB
1.3.6.1.4.1.43.2.7.7.1.5a3ipxX25configVCtimerA3COM-IPX-R5-MIB