All MIBs › A3COM-IPX-R5-MIB › a3ipxRouteDelay
a3ipxRouteDelay
Module: A3COM-IPX-R5-MIB
OID (symbolic): A3COM-IPX-R5-MIB::a3ipxRouteDelay
OID (numeric): 1.3.6.1.4.1.43.2.7.5.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The delay associated with the route.
What is a3ipxRouteDelay?
This integer metric represents the delay or cost associated with the route, typically in tens of milliseconds or hop equivalents. Network engineers adjust it to influence route preference when multiple paths exist. A value of 5 indicates a lower-cost path; 50 indicates a higher-cost path less preferred.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.7.5.1.8 snmpwalk -v2c -c public <target> A3COM-IPX-R5-MIB::a3ipxRouteDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.7.5.1.8.1 snmpget -v2c -c public <target> A3COM-IPX-R5-MIB::a3ipxRouteDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.7.5.1.8.1 i <value>
Start monitoring Legacy 3Com routers (R5, IPX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-IPX-R5-MIB::a3ipxRouteDelay OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers (R5, IPX) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.7 | a3ComIPX | A3COM-IPX-R5-MIB |
| 1.3.6.1.4.1.43.2.7.5 | a3ipxRouteTable | A3COM-IPX-R5-MIB |
| 1.3.6.1.4.1.43.2.7.5.1 | a3ipxRouteEntry | A3COM-IPX-R5-MIB |
| 1.3.6.1.4.1.43.2.7.5.1.8 | a3ipxRouteDelay | A3COM-IPX-R5-MIB |