All MIBs › A3COM-IPEXTNS-R5-MIB › a3IPextSplitLoadCtl
a3IPextSplitLoadCtl
Module: A3COM-IPEXTNS-R5-MIB
OID (symbolic): A3COM-IPEXTNS-R5-MIB::a3IPextSplitLoadCtl
OID (numeric): 1.3.6.1.4.1.43.2.6.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to control load splitting. If split (1), is specified, the traffic load is distributed among a set of least-equal-cost paths. These paths are selected on a round-robin basis. If a path is unreachable, it is not considered a candidate for load splitting.
What is a3IPextSplitLoadCtl?
This read-write INTEGER enables or disables load splitting, where traffic is distributed across multiple equal-cost paths in a round-robin fashion. Operators enable split load (1) to maximize link utilization and provide redundancy; when disabled, only one path is used. A setting of split mode increases effective capacity and fault tolerance for multi-path networks.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.6.4 snmpwalk -v2c -c public <target> A3COM-IPEXTNS-R5-MIB::a3IPextSplitLoadCtl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.6.4.1 snmpget -v2c -c public <target> A3COM-IPEXTNS-R5-MIB::a3IPextSplitLoadCtl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.6.4.1 i <value>
Start monitoring Legacy 3Com routers (R5) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-IPEXTNS-R5-MIB::a3IPextSplitLoadCtl OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers (R5) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.6 | a3ComIPextns | A3COM-IPEXTNS-R5-MIB |
| 1.3.6.1.4.1.43.2.6.4 | a3IPextSplitLoadCtl | A3COM-IPEXTNS-R5-MIB |