A3COM-HUAWEI-DOT3-EFM-EPON-MIB :: h3cDot3MpcpAdminState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-HUAWEI-DOT3-EFM-EPON-MIBh3cDot3MpcpAdminState

h3cDot3MpcpAdminState

Module: A3COM-HUAWEI-DOT3-EFM-EPON-MIB

OID (symbolic): A3COM-HUAWEI-DOT3-EFM-EPON-MIB::h3cDot3MpcpAdminState

OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.11

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This variable can be used to define the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. Selecting admin for an interface with Multi-Point MAC Control sublayer. When selecting the value as True the interface Multi-Point control protocol is enabled. When selecting the value as False the interface acts as if the Multi-point Control protocol does not exist. Reading reflects the state of the attribute and the operation of the Multi-point control protocol mode of the interface. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.

What is h3cDot3MpcpAdminState?

A read-write boolean that enables or disables the MPCP protocol on this interface. Network administrators toggle this to bring ports up or down gracefully. Setting it to true(1) activates MPCP; setting to false(0) disables multi-point MAC control, preventing ONU registration.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.11
snmpwalk -v2c -c public <target> A3COM-HUAWEI-DOT3-EFM-EPON-MIB::h3cDot3MpcpAdminState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.11.1
snmpget -v2c -c public <target> A3COM-HUAWEI-DOT3-EFM-EPON-MIB::h3cDot3MpcpAdminState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.11.1 s <value>

Start monitoring H3C EPON OLT/ONU equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-DOT3-EFM-EPON-MIB::h3cDot3MpcpAdminState OID value, configure state conditions and alerts, and monitor any H3C EPON OLT/ONU equipment from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.45jv_mibA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1huaweiA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10h3cA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2h3cCommonA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2.42h3cEponA3COM-HUAWEI-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.45.1.10.2.42.2h3cDot3EfmeponMIBA3COM-HUAWEI-DOT3-EFM-EPON-MIB
1.3.6.1.4.1.43.45.1.10.2.42.2.1h3cDot3MpcpMIBA3COM-HUAWEI-DOT3-EFM-EPON-MIB
1.3.6.1.4.1.43.45.1.10.2.42.2.1.1h3cDot3MpcpObjectsA3COM-HUAWEI-DOT3-EFM-EPON-MIB
1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1h3cDot3MpcpTableA3COM-HUAWEI-DOT3-EFM-EPON-MIB
1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1h3cDot3MpcpEntryA3COM-HUAWEI-DOT3-EFM-EPON-MIB
1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.11h3cDot3MpcpAdminStateA3COM-HUAWEI-DOT3-EFM-EPON-MIB