All MIBs › A3COM-DLSW-R1-MIB › dlswTConnConfigInitCirRecvWndw
dlswTConnConfigInitCirRecvWndw
Module: A3COM-DLSW-R1-MIB
OID (symbolic): A3COM-DLSW-R1-MIB::dlswTConnConfigInitCirRecvWndw
OID (numeric): 1.3.6.1.4.1.43.2.24.2.2.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The initial circuit receive pacing window size, in the unit of SSP messages, to be used for future transport connections activated using this table row. The managed node sends this value as its initial receive pacing window in its initial capabilities exchange message. Changing this value does not affect the initial circuit receive pacing window size of currently active transport connections. If the standard window pacing scheme is not supported, the value is zero.
A larger receive window value may be appropriate for partners that are reachable only via physical paths that have longer network delays.
What is dlswTConnConfigInitCirRecvWndw?
This OID specifies the initial receive window size for circuits, measured in SSP messages, as a 0-65535 integer. Network engineers configure this to control flow pacing on new transport connections before they're activated. A value of 4096 means the switch will buffer up to 4096 SSP messages before requiring sender confirmation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.24.2.2.1.11 snmpwalk -v2c -c public <target> A3COM-DLSW-R1-MIB::dlswTConnConfigInitCirRecvWndw
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.24.2.2.1.11.1 snmpget -v2c -c public <target> A3COM-DLSW-R1-MIB::dlswTConnConfigInitCirRecvWndw.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.24.2.2.1.11.1 i <value>
Start monitoring 3Com routers/bridges with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-DLSW-R1-MIB::dlswTConnConfigInitCirRecvWndw OID value, configure state conditions and alerts, and monitor any 3Com routers/bridges from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.24 | dlswMIB_3Com | A3COM-DLSW-R1-MIB |
| 1.3.6.1.4.1.43.2.24.2 | dlswTConn | A3COM-DLSW-R1-MIB |
| 1.3.6.1.4.1.43.2.24.2.2 | dlswTConnConfigTable | A3COM-DLSW-R1-MIB |
| 1.3.6.1.4.1.43.2.24.2.2.1 | dlswTConnConfigEntry | A3COM-DLSW-R1-MIB |
| 1.3.6.1.4.1.43.2.24.2.2.1.11 | dlswTConnConfigInitCirRecvWndw | A3COM-DLSW-R1-MIB |