All MIBs › A10-AX-MIB › axHATimeoutInterval
axHATimeoutInterval
Module: A10-AX-MIB
OID (symbolic): A10-AX-MIB::axHATimeoutInterval
OID (numeric): 1.3.6.1.4.1.22610.2.4.3.17.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
The HA time interval.
What is axHATimeoutInterval?
This read-only INTEGER specifies the heartbeat interval in milliseconds between HA peers to detect link failure or device unavailability. Shorter intervals trigger faster failover but consume more bandwidth; longer intervals reduce overhead but delay failure detection. A typical value of 3000 milliseconds (3 seconds) balances responsiveness with network efficiency.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22610.2.4.3.17.1.5 snmpwalk -v2c -c public <target> A10-AX-MIB::axHATimeoutInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22610.2.4.3.17.1.5.1 snmpget -v2c -c public <target> A10-AX-MIB::axHATimeoutInterval.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.22610 | a10 | A10-COMMON-MIB |
| 1.3.6.1.4.1.22610.2 | a10Mgmt | A10-COMMON-MIB |
| 1.3.6.1.4.1.22610.2.4 | axMgmt | A10-AX-MIB |
| 1.3.6.1.4.1.22610.2.4.3 | axApp | A10-AX-MIB |
| 1.3.6.1.4.1.22610.2.4.3.17 | axHA | A10-AX-MIB |
| 1.3.6.1.4.1.22610.2.4.3.17.1 | axHAGlobalConfig | A10-AX-MIB |
| 1.3.6.1.4.1.22610.2.4.3.17.1.5 | axHATimeoutInterval | A10-AX-MIB |