All MIBs › A10-AX-MIB › axHAPreemptStatusEnabled
axHAPreemptStatusEnabled
Module: A10-AX-MIB
OID (symbolic): A10-AX-MIB::axHAPreemptStatusEnabled
OID (numeric): 1.3.6.1.4.1.22610.2.4.3.17.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
The HA preempt enabled flag
What is axHAPreemptStatusEnabled?
This read-only INTEGER flag indicates whether preemption is enabled, controlling whether the primary device reclaims leadership after temporary failures. Preemption set to 1 means the originally designated primary automatically becomes active again, while 0 keeps the secondary running if it took over. This affects failover stability and traffic disruption during recovery.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22610.2.4.3.17.1.4 snmpwalk -v2c -c public <target> A10-AX-MIB::axHAPreemptStatusEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22610.2.4.3.17.1.4.1 snmpget -v2c -c public <target> A10-AX-MIB::axHAPreemptStatusEnabled.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.22610 | a10 | A10-COMMON-MIB |
| 1.3.6.1.4.1.22610.2 | a10Mgmt | A10-COMMON-MIB |
| 1.3.6.1.4.1.22610.2.4 | axMgmt | A10-AX-MIB |
| 1.3.6.1.4.1.22610.2.4.3 | axApp | A10-AX-MIB |
| 1.3.6.1.4.1.22610.2.4.3.17 | axHA | A10-AX-MIB |
| 1.3.6.1.4.1.22610.2.4.3.17.1 | axHAGlobalConfig | A10-AX-MIB |
| 1.3.6.1.4.1.22610.2.4.3.17.1.4 | axHAPreemptStatusEnabled | A10-AX-MIB |