All MIBs › A10-AX-MIB › axHAConfigEnabled
axHAConfigEnabled
Module: A10-AX-MIB
OID (symbolic): A10-AX-MIB::axHAConfigEnabled
OID (numeric): 1.3.6.1.4.1.22610.2.4.3.17.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
The HA configuration enabled flag.
What is axHAConfigEnabled?
This read-only INTEGER flag indicates whether High Availability clustering is configured on the device, typically 0 (disabled) or 1 (enabled). Network teams monitor this to confirm redundancy is configured and functioning for failover scenarios. A value of 1 means two devices are paired; if this drops to 0, HA configuration was lost and failover capability is compromised.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22610.2.4.3.17.1.1 snmpwalk -v2c -c public <target> A10-AX-MIB::axHAConfigEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22610.2.4.3.17.1.1.1 snmpget -v2c -c public <target> A10-AX-MIB::axHAConfigEnabled.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.22610 | a10 | A10-COMMON-MIB |
| 1.3.6.1.4.1.22610.2 | a10Mgmt | A10-COMMON-MIB |
| 1.3.6.1.4.1.22610.2.4 | axMgmt | A10-AX-MIB |
| 1.3.6.1.4.1.22610.2.4.3 | axApp | A10-AX-MIB |
| 1.3.6.1.4.1.22610.2.4.3.17 | axHA | A10-AX-MIB |
| 1.3.6.1.4.1.22610.2.4.3.17.1 | axHAGlobalConfig | A10-AX-MIB |
| 1.3.6.1.4.1.22610.2.4.3.17.1.1 | axHAConfigEnabled | A10-AX-MIB |