ZYXEL-STORM-CONTROL-MIB :: zyStromControlPortDlfRate

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZYXEL-STORM-CONTROL-MIB › zyStromControlPortDlfRate

zyStromControlPortDlfRate

Module: ZYXEL-STORM-CONTROL-MIB

OID (symbolic): ZYXEL-STORM-CONTROL-MIB::zyStromControlPortDlfRate

OID (numeric): 1.3.6.1.4.1.890.1.15.3.78.1.2.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Allowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800 pkts/s. For GE port, the maximum value is 262143 pkts/s.

What is zyStromControlPortDlfRate?

This object sets the maximum allowed rate, in packets per second, of destination-lookup-failure frames on a port, up to 148800 pkts/s on Fast Ethernet or 262143 pkts/s on Gigabit ports. Capping this rate prevents a burst of unknown-destination traffic, often caused by asymmetric routing or a MAC table flush, from being flooded out every other port. For example, an admin sets it to 8000 pkts/s on a Fast Ethernet port after noticing periodic switch-wide slowdowns traced to unknown-unicast flooding.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.15.3.78.1.2.1.6
snmpwalk -v2c -c public <target> ZYXEL-STORM-CONTROL-MIB::zyStromControlPortDlfRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.15.3.78.1.2.1.6.1
snmpget -v2c -c public <target> ZYXEL-STORM-CONTROL-MIB::zyStromControlPortDlfRate.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.890.1.15.3.78.1.2.1.6.1 i <value>

Start monitoring ZyXEL managed access switch (per-port broadcast/multicast/unknown-unicast threshold status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-STORM-CONTROL-MIB::zyStromControlPortDlfRate OID value, configure state conditions and alerts, and monitor any ZyXEL managed access switch (per-port broadcast/multicast/unknown-unicast threshold status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.890zyxelIES5206-MIB
1.3.6.1.4.1.890.1productsIES5206-MIB
1.3.6.1.4.1.890.1.15nwa1100nhNWA1100-NH
1.3.6.1.4.1.890.1.15.3esMgmtNWA1100-NH
Numeric OIDNameModule
1.3.6.1.4.1.890.1.15.3.78zyxelStormControlZYXEL-STORM-CONTROL-MIB
1.3.6.1.4.1.890.1.15.3.78.1zyxelStormControlSetupZYXEL-STORM-CONTROL-MIB
1.3.6.1.4.1.890.1.15.3.78.1.2zyxelStromControlPortTableZYXEL-STORM-CONTROL-MIB
1.3.6.1.4.1.890.1.15.3.78.1.2.1zyxelStromControlPortEntryZYXEL-STORM-CONTROL-MIB
1.3.6.1.4.1.890.1.15.3.78.1.2.1.6zyStromControlPortDlfRateZYXEL-STORM-CONTROL-MIB