All MIBs › ZYXEL-RATE-LIMIT-MIB › zyRateLimitPortCommitRate
zyRateLimitPortCommitRate
Module: ZYXEL-RATE-LIMIT-MIB
OID (symbolic): ZYXEL-RATE-LIMIT-MIB::zyRateLimitPortCommitRate
OID (numeric): 1.3.6.1.4.1.890.1.15.3.72.1.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow on the specified port. The commit rate should be less than the peak rate. The sum of commit rates cannot be greater than or equal to the uplink bandwidth.
What is zyRateLimitPortCommitRate?
This read-write INTEGER specifies the guaranteed bandwidth, in kilobits per second, allowed for incoming traffic on a specific port, and must be less than the port's peak rate while the sum of all commit rates cannot equal or exceed the uplink bandwidth. An admin sets this to reserve a minimum throughput for a port's traffic under congestion. For example, setting zyRateLimitPortCommitRate to 10000 (10 Mbps) on a port guarantees that port at least 10 Mbps of ingress bandwidth.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.15.3.72.1.2.1.2 snmpwalk -v2c -c public <target> ZYXEL-RATE-LIMIT-MIB::zyRateLimitPortCommitRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.15.3.72.1.2.1.2.1 snmpget -v2c -c public <target> ZYXEL-RATE-LIMIT-MIB::zyRateLimitPortCommitRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.890.1.15.3.72.1.2.1.2.1 i <value>
Start monitoring ZyXEL managed switch (per-port ingress/egress bandwidth-cap config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-RATE-LIMIT-MIB::zyRateLimitPortCommitRate OID value, configure state conditions and alerts, and monitor any ZyXEL managed switch (per-port ingress/egress bandwidth-cap config status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.890 | zyxel | IES5206-MIB |
| 1.3.6.1.4.1.890.1 | products | IES5206-MIB |
| 1.3.6.1.4.1.890.1.15 | nwa1100nh | NWA1100-NH |
| 1.3.6.1.4.1.890.1.15.3 | esMgmt | NWA1100-NH |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.890.1.15.3.72 | zyxelRateLimit | ZYXEL-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.890.1.15.3.72.1 | zyxelRateLimitSetup | ZYXEL-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.890.1.15.3.72.1.2 | zyxelRateLimitPortTable | ZYXEL-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.890.1.15.3.72.1.2.1 | zyxelRateLimitPortEntry | ZYXEL-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.890.1.15.3.72.1.2.1.2 | zyRateLimitPortCommitRate | ZYXEL-RATE-LIMIT-MIB |