All MIBs › ZYXEL-OAM-MIB › zyOamPortFunctionsSupported
zyOamPortFunctionsSupported
Module: ZYXEL-OAM-MIB
OID (symbolic): ZYXEL-OAM-MIB::zyOamPortFunctionsSupported
OID (numeric): 1.3.6.1.4.1.890.1.15.3.56.1.2.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: The OAM functions supported on this Ethernet-like interface. OAM consists of separate functional sets beyond the basic discovery process that is always required. These functional groups can be supported independently by any implementation. These values are communicated to the peer via the local configuration field of Information OAMPDUs. Setting 'unidirectionalSupport(0)' indicates that the OA entity supports the transmission of OAMPDUs on links that are operating in unidirectional mode (traffic flowing in one direction only). Setting 'loopbackSupport(1)' indicates that the OAM entity can initiate and respond to loopback commands. Setting 'eventSupport(2)' indicates that the OAM entity can send and receive Event Notification OAMPDUs. Setting 'variableSupport(3)' indicates that the OAM entity can send and receive Variable Request and Response OAMPDUs.
What is zyOamPortFunctionsSupported?
This is a bitmask (BITS) indicating which optional 802.3ah OAM functional capabilities, unidirectional support, remote loopback, event notification, and variable request/response, this Ethernet-like interface supports, and these values get communicated to the OAM peer during discovery. An administrator or the switch itself uses this to advertise exactly which OAM capabilities the port can participate in when negotiating OAM with a connected peer device. For example, a port with only loopbackSupport(1) and eventSupport(2) set would advertise that it can perform remote loopback tests and send event notifications, but not unidirectional or variable-request OAM operations.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.15.3.56.1.2.1.1 snmpwalk -v2c -c public <target> ZYXEL-OAM-MIB::zyOamPortFunctionsSupported
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.15.3.56.1.2.1.1.1 snmpget -v2c -c public <target> ZYXEL-OAM-MIB::zyOamPortFunctionsSupported.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.890.1.15.3.56.1.2.1.1.1 s <value>
Start monitoring ZyXEL managed switch, metro Ethernet/fiber edge (802.3ah OAM peer-discovery/dying-gasp status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-OAM-MIB::zyOamPortFunctionsSupported OID value, configure state conditions and alerts, and monitor any ZyXEL managed switch, metro Ethernet/fiber edge (802.3ah OAM peer-discovery/dying-gasp status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.890 | zyxel | IES5206-MIB |
| 1.3.6.1.4.1.890.1 | products | IES5206-MIB |
| 1.3.6.1.4.1.890.1.15 | nwa1100nh | NWA1100-NH |
| 1.3.6.1.4.1.890.1.15.3 | esMgmt | NWA1100-NH |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.890.1.15.3.56 | zyxelOam | ZYXEL-OAM-MIB |
| 1.3.6.1.4.1.890.1.15.3.56.1 | zyxelOamSetup | ZYXEL-OAM-MIB |
| 1.3.6.1.4.1.890.1.15.3.56.1.2 | zyxelOamPortTable | ZYXEL-OAM-MIB |
| 1.3.6.1.4.1.890.1.15.3.56.1.2.1 | zyxelOamPortEntry | ZYXEL-OAM-MIB |
| 1.3.6.1.4.1.890.1.15.3.56.1.2.1.1 | zyOamPortFunctionsSupported | ZYXEL-OAM-MIB |