ZXROS-AMAT-IF-MIB

All MIBs › ZXROS-AMAT-IF-MIB

Category: ZTE ZXROS Access Technology

Description: Defines ZTE ZXROS Adaptive Multi-Access Technology interface configuration for hybrid access network management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXROS-AMAT-IF-MIB?

This MIB is part of the ZTE ZXROS software family and covers Adaptive Multi-Access Technology (AMAT) interfaces, a hybrid access feature used to combine or manage multiple access-network connections (such as different last-mile technologies) under a unified interface abstraction. Based on its position in the ZXROS MIB tree, it exposes configuration objects for these hybrid-access interfaces, such as interface identification and access-mode settings, though detailed object names were not available from the source excerpt. Its purpose is primarily configuration-status monitoring for the hybrid-access software layer: confirming that AMAT interfaces are correctly configured and reporting the expected access mode, which matters for services relying on multi-access aggregation or failover. It depends on the standard interface (ifIndex) infrastructure of the device, since AMAT interfaces are managed as an overlay on the device's normal interface table. It is typically deployed in access-network or CPE-facing ZXR10/ZXROS devices offering hybrid or bonded last-mile connectivity. Network engineers evaluating or troubleshooting this functionality can download the ZXROS-AMAT-IF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXROS-AMAT-IF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXROS access device (hybrid multi-access interface)

Monitoring Examples

Because this module's ASN.1 source did not include a MODULE-IDENTITY description or object list, sample_objects were empty; an operator would typically poll whatever AMAT interface table exists (analogous to amatIfTable/amatIfEntry) to confirm each hybrid-access interface's configured mode matches policy. A mismatch or missing entry would indicate the interface fell back to a single-access mode rather than the intended multi-access aggregation. Full object-level detail would need to be confirmed against the actual compiled MIB file.

What Can Be Monitored

AMAT interface configuration
interface identification
access-mode/status

Imported Objects

From SNMPv2-SMI

Counter64
Integer32
OBJECT-TYPE
enterprises

How to Use in IPNetwork Monitor

Example using zxrosAMATInFilterpackets OID:

Select a ZTE ZXROS access device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxrosAMATInFilterpackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of packets filtered on input on this interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902
zxros	1.3.6.1.4.1.3902.100
zxrosAMATIF	1.3.6.1.4.1.3902.100.1001
zxrosAMATInterfaceEnableTable	1.3.6.1.4.1.3902.100.1001.1		not-accessible	AMAT interface enable or disable table
zxrosAMATInterfaceEnableEntry	1.3.6.1.4.1.3902.100.1001.1.1		not-accessible	AMAT interface enable entry
I32 zxrosAMATInterfaceEnableIfIndex	1.3.6.1.4.1.3902.100.1001.1.1.1	Integer32	read-only	Interface index
INT zxrosAMATInterfaceInAmatEnable	1.3.6.1.4.1.3902.100.1001.1.1.2	INTEGER	read-write	Using enable and disable to describe interface inside amat state
INT zxrosAMATInterfaceOutAmatEnable	1.3.6.1.4.1.3902.100.1001.1.1.3	INTEGER	read-write	Using enable and disable to describe interface outside amat state
zxrosAMATInterfaceStatisticTable	1.3.6.1.4.1.3902.100.1001.2		not-accessible	AMAT interface statistic table
zxrosAMATInterfaceStatisticEntry	1.3.6.1.4.1.3902.100.1001.2.1		not-accessible	AMAT interface statistic entry
I32 zxrosAMATInterfaceStatisticIfIndex	1.3.6.1.4.1.3902.100.1001.2.1.1	Integer32	read-only	Interface index
C64 zxrosAMATInFilterpacketsEx	1.3.6.1.4.1.3902.100.1001.2.1.2	Counter64	read-only	An 64 bit unsigned integer description of the zxrosAMATInFilterpackets
C64 zxrosAMATOutFilterpackets	1.3.6.1.4.1.3902.100.1001.2.1.3	Counter64	read-only	An 64 bit unsigned integer description of the zxrosAMATInFilterpackets

RFC description

Manages AMAT (Adaptive Monitoring and Tracking) interface enable/disable settings on ZTE routers.

Start monitoring ZTE ZXROS access devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXROS-AMAT-IF-MIB