All MIBs › ZXR10-TWAMP-MIB › zxr10twampSessionDurationMode
zxr10twampSessionDurationMode
Module: ZXR10-TWAMP-MIB
OID (symbolic): ZXR10-TWAMP-MIB::zxr10twampSessionDurationMode
OID (numeric): 1.3.6.1.4.1.3902.3.6000.134.2.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: The sending packet mode: continuous:In this mode,the test packets will always be sent until the user stops. packets:In this mode,the test will be stopped until the number of sending packet reaches the configured value. seconds:In this mode,the test will be stopped until the time of sending packet reaches the configured value.(default :continuous)
What is zxr10twampSessionDurationMode?
This read-create setting chooses how a test run ends: continuous(1, default, runs until manually stopped), packets(2, stops after a configured packet count), or seconds(3, stops after a configured duration). An admin picks packets or seconds mode to run a bounded, repeatable latency test rather than an open-ended one.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | UAS-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | ZXR10-BFD-MIB |
| 1.3.6.1.4.1.3902.3.6000 | zxr10RosngMIB | ZXR10-HAGP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.6000.134 | zxr10twampMIB | ZXR10-TWAMP-MIB |
| 1.3.6.1.4.1.3902.3.6000.134.2 | zxr10twampSessionTable | ZXR10-TWAMP-MIB |
| 1.3.6.1.4.1.3902.3.6000.134.2.1 | zxr10twampSessionEntry | ZXR10-TWAMP-MIB |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.13 | zxr10twampSessionDurationMode | ZXR10-TWAMP-MIB |