ZXR10-SWITCH-VLAN-MIB :: zxr10QinQInterTpid

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsZXR10-SWITCH-VLAN-MIBzxr10QinQInterTpid

zxr10QinQInterTpid

Module: ZXR10-SWITCH-VLAN-MIB

OID (symbolic): ZXR10-SWITCH-VLAN-MIB::zxr10QinQInterTpid

OID (numeric): 1.3.6.1.4.1.3902.3.102.3.4

Node type: OBJECT-TYPE

Type: TPIDType

Access: read-only

Description: The global internal qinq TPID,valid value is 1-5,they separately mean 8100 88a8 9100 9200 9300,it can be set by different project.

What is zxr10QinQInterTpid?

The global internal TPID (tag protocol identifier) value used for QinQ (802.1Q-in-802.1Q) double-tagging on this switch, selectable among 0x8100, 0x88a8, 0x9100, 0x9200, or 0x9300 depending on the interop needs of the deployment; defaults to 0x8100.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.3.4
snmpwalk -v2c -c public <target> ZXR10-SWITCH-VLAN-MIB::zxr10QinQInterTpid

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.3.4.1
snmpget -v2c -c public <target> ZXR10-SWITCH-VLAN-MIB::zxr10QinQInterTpid.1

Start monitoring ZTE Corporation ZXR10 switches (CPU-VLAN/QinQ/membership config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-SWITCH-VLAN-MIB::zxr10QinQInterTpid OID value, configure state conditions and alerts, and monitor any ZTE Corporation ZXR10 switches (CPU-VLAN/QinQ/membership config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteUAS-MIB
1.3.6.1.4.1.3902.3zxr10ZXR10-BFD-MIB
1.3.6.1.4.1.3902.3.102zxr10switchZXR10-DHCPSNOOPING-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3902.3.102.3zxr10QinQZXR10-SWITCH-VLAN-MIB
1.3.6.1.4.1.3902.3.102.3.4zxr10QinQInterTpidZXR10-SWITCH-VLAN-MIB