ZXR10-RTM-L2VPN :: rtmL2vpnIfVlanRangeBot2

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZXR10-RTM-L2VPN › rtmL2vpnIfVlanRangeBot2

rtmL2vpnIfVlanRangeBot2

Module: ZXR10-RTM-L2VPN

OID (symbolic): ZXR10-RTM-L2VPN::rtmL2vpnIfVlanRangeBot2

OID (numeric): 1.3.6.1.4.1.3902.3.104.3.1.1.1.13

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Rtm L2vpn Vfi Interface Vpn Type

What is rtmL2vpnIfVlanRangeBot2?

The lower bound of the second configured VLAN range accepted on this L2VPN interface, paired with rtmL2vpnIfVlanRangeTop2.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.104.3.1.1.1.13
snmpwalk -v2c -c public <target> ZXR10-RTM-L2VPN::rtmL2vpnIfVlanRangeBot2

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.104.3.1.1.1.13.1
snmpget -v2c -c public <target> ZXR10-RTM-L2VPN::rtmL2vpnIfVlanRangeBot2.1

Start monitoring ZTE ZXR10 MPLS provider-edge router (L2VPN route/forwarding-table-entry status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-RTM-L2VPN::rtmL2vpnIfVlanRangeBot2 OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 MPLS provider-edge router (L2VPN route/forwarding-table-entry status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.3zxr10FANS-POWER-MIB
1.3.6.1.4.1.3902.3.104zxr10l2vpnZXR10-L2VPN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3902.3.104.3rtmL2vpnMIBZXR10-RTM-L2VPN
1.3.6.1.4.1.3902.3.104.3.1rtmL2vpnVplsIfObjectsZXR10-RTM-L2VPN
1.3.6.1.4.1.3902.3.104.3.1.1rtmL2vpnIfTableZXR10-RTM-L2VPN
1.3.6.1.4.1.3902.3.104.3.1.1.1rtmL2vpnIfEntryZXR10-RTM-L2VPN
1.3.6.1.4.1.3902.3.104.3.1.1.1.13rtmL2vpnIfVlanRangeBot2ZXR10-RTM-L2VPN